Product Line
1200
Original Moen standard cartridge, used in older Moen one-handle faucets (except Posi-Temp® valve). Brass construction.
1222
Fits all Posi-Temp faucets. Resists corrosion.
1224
Fits all Moen two-handle kitchen and lavatory faucets and two- and three-handle tub/shower faucets created prior to the launch of our Duralast® two-handle cartridges. The 1224 and Duralast cartridges are not interchangeable.
1225
Introduced in 1981 and used in Moen one-handle kitchen faucets launched prior to 2009 and Moen one-handle lavatory faucets launched prior to 2011. The 1225 fits all one-handle non-pressure balanced tub/shower valves as well as Moentrol® tub/shower valves.
1248
Designed to fit all Moen two-handle Roman tub valves.
Browse by Model
Model: 1200
For One-Handle Kitchen and Bath Faucets
The original Moen cartridge, the 1200 provided one-handle operation. It was used in all one-handle faucets, except the Posi-Temp shower valve, prior to the introduction of the 1225 in 1981.
HOW IT IS USED:
Currently used as a replacement cartridge for older one-handle faucets. It is not compatible with newer faucets, which are now designed around the 1255 Duralast® cartridge.
CONSTRUCTION:
Brass construction; 180-degree rotation from hot to cold.
QUICK FIX:
There is no repair kit available for the 1200 cartridge, it can be replaced with a new 1200 or a 1225 cartridge. If the application is Moentrol® 3-function vertical spa transfer valve, then it can be replaced with the 116719 cartridge.
BENEFITS:
- Volume control with temperature memory
- Fits older one-handle faucets
Model: 1222
For One-Handle Posi-Temp Valves
Higher flow-rate valve for tub and shower applications.
HOW IT IS USED:
Fits all Posi-Temp® tub/shower valves.
CONSTRUCTION:
High temperature thermoplastic and brass construction with a polyphenylene shell to resist corrosion. Cycling valve 270-degree rotation.
QUICK FIX:
Repair or replacement fixes most faucet problems. Repair kit available for warranty issues (Moen part #98040).
BENEFITS:
- Accommodates back-to-back installation, tub and shower flow reversibility
- Built-in pressure-balancing mechanism maintains temperature +/-3 degrees during pressure drop with showerhead flow-rates as low as 1.5 gpm
How To Remove & Install the 1222 Standard Cartridge
Model: 1224
For Two-Handle Kitchen and Bath Faucets
Flexible use high flow-rate cartridge.
HOW IT IS USED:
Prior to the introduction of Duralast® two-handle cartridges, the 1224 was designed to support all Moen two- and three-handle valves, including pot fillers as well as two- and three-handle non-pressure balancing tub and shower faucets.
CONSTRUCTION:
Stainless steel piston, Acetal shell for reduced corrosion, 90-degree rotation for hot and cold. Designed to allow line trash to pass through during installation.
QUICK FIX:
Replace cartridge; there are no parts offered to repair the cartridge.
BENEFITS:
- Interchangeable between hot and cold
- Simple on/off volume control
How To Remove & Install the 1224 Standard Cartridge
Model: 1225
For One-Handle Faucets
Introduced in 1981, the patented 1225 Magnum non-metallic cartridge is impervious to corrosion and mineral build-up and is designed to allow line trash to pass through.
HOW IT IS USED:
Fits Moen one-handle kitchen faucets launched prior to 2009 and Moen one-handle lavatory faucets launched prior to 2011. Fits all one-handle non-pressure balanced tub/shower valves and Moentrol® tub/shower valves.
CONSTRUCTION:
Stainless steel, brass and copper construction, polysulfone shell, 180-degree rotation from hot to cold.
QUICK FIX:
Repair or replacement fixes most faucet pr1200 kit available for warranty issues (Moen part #92451).
BENEFITS:
- Retrofits 1200 cartridge
- Includes volume control and temperature memory
How To Remove & Install the 1225 Standard Cartridge
Model: 1248
For Two-Handle Roman Tub Valves
High flow-rate for shower and tub applications.
HOW IT IS USED:
Designed to fit all Moen two-handle Roman tub faucets. Engineered to have a larger outlet port for higher flow rate.
CONSTRUCTION:
Stainless steel construction, Acetal shell, 180-degree rotation for hot and cold. Designed to allow line trash to pass through during installation.
QUICK FIX:
Replace cartridge; there are no parts offered to repair the cartridge.
BENEFITS:
- Design supports multiple valves and handle configurations
- Interchangeable between hot and cold
- Simple on/off
- Volume control
How To Remove & Install the 1248 Standard Cartridge
