How do I clean the screen filter in the control box?

17 of 67 found this answer helpful
Verify your faucet by identifying the control box under your sink
MotionSense - Gray Box with 7 Hoses

Turn off the water supply lines and remove the filter plug from the bottom of the control box using a flat-bladed screwdriver. Rinse debris from the screen, then reinstall. To clean the screen on hose "2" follow hose removal instructions here. Once removed, use two wrenches on the flat surfaces to separate the brass filter housing. Rinse screen of any debris and reassemble. When reinstalling the hose, confirm it is in place by giving a slight pull.

MotionSense - Black Box with 3 Hoses

Hose removal and cleaning of the filter screens can be found in the troubleshooting section of the instruction guide found here

Was this helpful?
Yes No
Thanks for your feedback!
Back
To Top
United States/English [Change]