Model: Y2601BN

Banbury Brushed nickel tank lever

Finish: Brushed Nickel

Features

The Banbury collection highlights a timeless nostalgia for traditional versatility and sets a tone that is both classical and sensible. This subtle design is elegant and, with its round bell accents, reflects the sophisticated values of traditional homeowners.

  • brushed nickel finish brings the warm look of stainless to your bath
  • limited lifetime warranty

  • SpotResist
  • Lifetime Limited Warranty

The Banbury Collection

The Banbury collection highlights a timeless nostalgia for traditional versatilty and sets a tone that is both classical and sensible.

View Collection

Coordinating Collection Items

Installation and Support

Installation video

Installing a Decorative Tank Lever
Installing a Decorative Tank Lever

Support

Access videos, manuals, replacement parts, and more.
Access videos, manuals, replacement parts, and more.

Warranty

Replacement Parts for this product may be covered by the Lifetime Limited Warranty

Rated 4 out of 5 by from Nice but needs more adjustment This is a very nice well built flush mechanism, However in my situation I need the handle to face forward toward the bowl. I was able to face it forward and it functions but I have to lift UP and not push down on the handle. I wish there was a way to reverse the spring mechanism to allow a downward pull from the front position. This is a WELL built product! I HIGHLY recommend it!
Date published: 2018-09-29
Rated 4 out of 5 by from Matches other fixtures. I like the versatility of the rod in the tank but I am concerned that it's made of plastic. There should be a trim piece that mounts flush against the outside of the tank for better aesthetics.
Date published: 2018-04-24
Rated 3 out of 5 by from flush lever Outstanding design, look and ease of installation. However, the quality of the plastic causes it to wear prematurely. This is the second flush lever I have purchased it less than one year! The design needs to be reevaluated and improved for longer endurance.
Date published: 2016-11-29
Rated 5 out of 5 by from Very Attractive Very stylish and attractive. Professionally installed with ease.
Date published: 2016-05-10
Rated 5 out of 5 by from Nice Product The product meets my needs, bought to match décor of bathroom
Date published: 2016-02-14
Rated 5 out of 5 by from Very High Quality Product This toilet flush handle exceeds my high standard for toilet flush handles. LOL Seriously, the handle has a heavy duty feel to it. The internal wetted parts are plastic, so they won't rust. It is adjustable in several ways to accommodate different tank configurations, water level settings and flapper chain lengths. I would gladly purchase it again.
Date published: 2016-02-11
Rated 4 out of 5 by from One, two, three Done! This took less than 5 minutes to install. The mechanism inside the tank does stick out a little too far, and did interfere with the float on the fill valve, but was able to adjust it. Very well built!
Date published: 2013-09-28
Rated 3 out of 5 by from Sticks Out Too Far I love the look, the durability of this toilet flusher. Matches the rest of my Banbury Mediterranean bronze bathroom fixtures very well. The flusher, however, sticks out too far. OEM flushers are usually much more, ahem, flush, with the surface of the tank and fit under the profile of the tank top. This sticks out too far and therefore the toilet seat cover gets pushed up against the flusher on one side, making the seat cover twist when you're using the john and leaning back at all. It shouldn't stick out so far. If your installation of this flusher is on the side of the tank this won't be an issue. If installed on the front of the tank or on an angle, you'll run into this issue. It looks nice, so I'm keeping it. I'm not that pleased with it though.
Date published: 2013-07-27
  • y_2018, m_12, d_13, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_Y2601BN, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_moen
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 15ms
  • REVIEWS, PRODUCT

The "A" nut didn't come in the box. What size nut do I need to buy? 3/8 was too small but 1/2 was too big...

Asked by: Amanda
Hello Amanda, the Moen tank lever model #Y2601BN, has an M4 nut that holds it in place.
Answered by: Moen Consumer Services
Date published: 2018-04-08
  • y_2018, m_12, d_13, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_Y2601BN, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_moen
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 24ms
  • QUESTIONS, PRODUCT