Model: 82602

Adler Chrome standard tub/shower

Finish: Chrome


With its smooth curves and minimalist aesthetics, the Adler collection suites a variety of décor preferences. A low arc profile makes the Adler faucet an essential in smaller bathrooms or powder rooms.

  • chrome finish is highly reflective for a mirror-like look that works with any decorating style
  • lever handle makes it easy to adjust the water
  • 4" diameter spray head
  • 5 1/2" tub spout length
  • meets EPA WaterSense® criteria to conserve water without sacrificing performance
  • limited lifetime warranty

  • WaterSense
  • Lifetime Limited Warranty
Connection Size
Connection Type
Showerhead Functions
Showerhead Type
Showerhead Size
4" diameter spray head
Showerhead Flow Rate
1.75 gpm (6.65 L/min) max.
Spout Length
5 1/2"
Spout Connection Type
Tub Spout Type
Download Specs PDF

The Adler Collection

With its smooth curves and minimalist aesthetics, the Adler collection suites a variety of décor preferences.

View Collection

Installation and Support

Product Diagram

Check out a product diagram and parts list, and order individual parts with confidence.


Replacement Parts for this product may be covered by the Lifetime Limited Warranty

Rated 2 out of 5 by from Handle Installation I purchased this to replace the old one I had. The install was relatively simple being that I had to install it from behind the tub/shower. When I went to install the faucet handles, they both are at the 9:00 o'clock position when turned off. The photo's and instructions show them at the 9:00 o'clock for the hot and 3:00 o'clock for the cold. I double checked the inside of the handles and I have them on the correct valves. There is a H inside the handle for the hot and a C inside the handle for the cold. Looks pretty goofy like this. Hope to get some assistance on this problem.
Date published: 2019-03-01
Rated 1 out of 5 by from do not purchase I bought this product because Moen is a name you associate with quality, but this unit has plastic cartridges and they don't hold up. Moen has been great about sending replacements but it is very inconvenient to have to shut the water off, take everything apart, install the new cartridge, put it all back together and hope that it works for more than a couple of weeks before you have to do it all over again. It's always the hot ones that goes and this stands to reason because as we know plastic gets soft when heated so the little notch that sticks out gets worn. I will have to replace the whole unit and this will involve moving both the washer and dryer from my utility room, cutting a hole in the wall, again, doing the replacement, and repairing the wall, putting the washer and dryer back. Anyone that has had the experience of lining a dryer back up with the floor vent knows just how much of a hassle this is. I did ask Moen if they would consider replacing this unit with a different one and was told no. I believe that Moen is an excellent brand, Just not this particular fixture.
Date published: 2019-02-12
Rated 2 out of 5 by from Quality is questionable The plumber who did install made several remarks about the lack of quality of the unit especially the plastic pieces on the stems. I felt the same way.
Date published: 2018-11-28
Rated 3 out of 5 by from Replacement I hate to criticize, but too much plastic. I just don't think it will last. Hope to be wrong. I would have expected a much more sturdy product. We will see???
Date published: 2018-03-07
Rated 1 out of 5 by from Alder Model # 82602 Great price but the shut off (cold ) not shutting off properly just installed last night !
Date published: 2018-02-23
Rated 3 out of 5 by from Jury is still out I felt the product was not as good as what I replaced. There is to much plastic for me. The stems are not very firm and the levers are hard to get set to the proper position. I have a drip at the end of the shower spout that I cannot stop and it has been dripping since installation. I have tried all I know to do besides replacing the unit and it was installed between the walls and I cannot get to it to remove it now without cutting a hole in the shower wall. Not pleased with the product for the money spent I would have thought it to be better.
Date published: 2017-09-02
Rated 1 out of 5 by from Poor Quality The valve body is so weak that it is hard to install without bending the tubes going to the valves. The handle adjustment is difficult to make. The cheap plastic shaft keeps coming out when you try to tighten the handle and keep it in the correct position. Very disappointed with what used to be a quality company.
Date published: 2017-08-21
Rated 2 out of 5 by from Not sure yet If I can get some help on getting the handles to be in the proper position I might give it a little higher rating. The cold handle is at 3 o'clock which is right, however the hot handle is at 2 o'clock which should be at 9 o'clock. Waiting on answer from support if it can be re-positioned. I think the faucet is pretty decent for the price except mentioned above and I not sure how well the plastic stems that the handles attach to are going to hold up.
Date published: 2017-08-21
  • y_2019, m_4, d_24, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_82602, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_moen
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 57ms

Moen 82403 model has equal model number?

Asked by: mansich
Hello mansich and thank you for your interest in Moen products. Model 82403 is a 3-handle shower and tub unit with a center knob to divert the water to the showerhead. The 82602 is a two-handle unit that includes a diverting tub spout. If you are interested in a 3-handle shower, the models we currently offer are 82663 and 2995EP. For additional assistance, please feel free to call us at 800-289-6636.
Answered by: Moen Consumer Services
Date published: 2018-07-18

I need extension kit some one help me

Asked by: KEVIN12232
Hello Kevin12232 and thank you for your interest in Moen products. The Moen model #82602, does have an extension kit available which is part #91110.
Answered by: Moen Consumer Services
Date published: 2018-04-04

I installed 2 of these units in separate bathroom using 1/2 plex hose to the inputs and 1/2 CPVC to both the Shower and Spout. Water is coming out both when the water is turned on. Have put a inline pressure regulator on the input to the house still leak.

Asked by: Ricky01253
Hello Ricky01253 and thank you for your interest in Moen products. Moen tub/shower products do not recommend using PEX or CPVC for the tub-drop pipe to ensure that there is no restriction in water flow and to prevent a condition referred to as "stacking". This condition can best be described as the water leaving the tub spout is not able to get out of the spout fast enough that the water begins to back up behind the wall. The only place for the water to back up to is up the shower pipe and out the showerhead. Half inch copper tubing or the equivalent to ½" brass pipe size material is recommended to prevent stacking. If you have additional questions, please don't hesitate to call us at 1-800-289-6636 or visit the "Contact Us" tab on to send us an email.
Answered by: Moen Consumer Services
Date published: 2018-03-28

adjust handles so both in same position for off and on

Asked by: johnk
Hello John, and thank you for your interest in Moen products. To adjust the handles on The Moen Adler 82602 Standard Tub/Shower you will need to remove the handle, brass cartridge nut, and handle adapter. You will then remove the shorter part of the handle extension, rotate 180 degrees and reinstall all parts in reverse order.
Answered by: Moen Consumer Services
Date published: 2018-04-01
  • y_2019, m_4, d_24, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_82602, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_moen
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 64ms