Standing back and admiring your stunning Mirrorscapes frame is just a few steps away. Because our frames require only straight cuts (no angled miter cuts are needed!), they install easily in around 30 minutes.

All you need is a measuring tape, marker, and a saw to get started.

Follow along with printable instructions

Download instructions for your convenience.

You'll need Acrobat Reader to view these instructions. If you don't have it installed
Click here to Download Acrobat.

1. Remove backing to expose adhesive on mounting brackets.
2. Position corner template on the mirror.
3. Guided by template, secure corner mounting bracket to mirror.
4. Once secure, remove template. repeat process on all corners of mirror.
5. Center straight template at edge of mirror.
6. Guided by template, secure straight mounting bracket to mirror.
7. Once secure, remove template. Repeat on all sides of mirror.
8. Attach decorative corners onto corner mounting brackets.
9. With a marker, trace inner edges of each corner piece, then remove all corner pieces.
10. Measure between marked lines to determine length of straight pieces.
11. Cut straight pieces to measurements.
12. Press straight pieces onto mounting brackets.
13. Press decorative corners into place.