My rough-in valve in the shower was installed too far back from my finished wall. Can I get an extension kit to correct this?

78 of 120 found this answer helpful

Yes. The extension kit number will be dependent on the type of valve that is installed, as well as the finish of the trim. Below is a list out service kit numbers and descriptions for some of these extensions kits that are available.

The extension kits for Posi-Temp valve:

Service kitDescription
969451" Chrome extension
96945BN1" Brushed Nickel extension
9698581" Polished Brass extension
96945PM1" Platinum or Satine extension
96945WR1" Wrought Iron or Oil Rubbed Bronze extension
969552" Chrome extension
968682" Polished Brass extension

For the Moentrol valve:

Service kitDescription
1373471" Chrome extension
137347BN1" Brushed Nickel extension
137347P1" Polished Brass extension
137347NL1" Nickel extension
137347WR1" Wrought Iron or Oil Rubbed Bronze extension
137347BB1" Brushed Bronze extension

For the Moentrol 2- or 3- function valve (installed after July 2007):

Service kitDescription
1371671" Chrome extension
137167BN1" Brushed Nickel extension
137167WR1" Wrought Iron or Oil Rubbed Bronze extension

For the 2- or 3-function transfer valves (models 3375 or 3372):

Service kitDescription
1484791" Chrome extension
148479BN1" Brushed Nickel extension
148479WR1" Wrought Iron or Oil Rubbed Bronze extension

For the 3/4" Exact Temp valve (installed after September 2009):

Service kitDescription
1472063/4" extension fir the S3371 valve
1472121" extension for the S3600 volume control valve

Was this helpful?
Yes No
Thanks for your feedback!
Back
To Top
United States/English [Change]