| 1. |
If you are replacing
a cartridge in faucet type A continue to step 2a.
If you are replacing a cartridge in faucet type B continue
to step 3a.
If you are replacing a cartridge in faucet type C continue
to step 4a.
If you are replacing a cartridge in faucet type D continue
to step 5a.
If you are replacing a cartridge in faucet type E continue
to step 6a.
If you are replacing a cartridge in faucet type F continue
to step 7a.
|
 |
 |
| 2a. |
Disassembly
To remove the cartridge from your faucet assembly, first use a flat-headed screwdriver
to carefully pry the cover from the handle. Using a Philips screwdriver unscrew
the handle screw. |
 |
| 2b. |
Pull the handle off from the
faucet and pull the limit stop off. Remove the washer from the cartridge
and use pliers to remove the retaining clip |
 |
| 2c. |
Cartridge Removal
You are now ready to remove the old cartridge. Insert the white plastic tool,
which is included in your kit, onto the cartridge stem so that it straddles
the ears. Use pliers on the white plastic tool and loosen the cartridge by
twisting back and forth. After removing the white plastic tool, grasp the cartridge
stem and pull it straight out of the valve. |
 |
| 2d. |
Cartridge Reassembly
You can now install your new cartridge. Push the cartridge
straight into the valve, making sure that the ears of the cartridge
are lined up precisely with the retaining clip notch. |
 |
| 2e. |
To install the cartridge into
your faucet assembly, reverse the steps that you followed to remove
the old cartridge. Reinstall the clip and replace the washer onto the
cartridge. Then replace the limit stop, and replace and secure the
handle. Finally, snap the handle cover into place. Go to step 8 if
you want to reverse the Hot and Cold sides. |
 |
| 3a. |
Disassembly
To remove the cartridge from your faucet assembly, first use a hex wrench to
loosen and remove the screw from the front of the handle. Then, pull the handle
off from the faucet. |
 |
| 3b. |
To remove the cartridge from
your faucet assembly, first use a hex wrench to loosen and remove the
screw from the front of the handle. Then, pull the handle off from
the faucet. |
 |
| 3c. |
To remove the cartridge from
your faucet assembly, first use a hex wrench to loosen and remove the
screw from the front of the handle. Then, pull the handle off from
the faucet. |
 |
| 3d. |
Cartridge Removal
You are now ready to remove the old cartridge. Insert the
white plastic tool, which is included in your kit, onto the cartridge
stem so that it straddles the ears. Use pliers on the white plastic
tool and loosen the cartridge by twisting back and forth. After removing
the white plastic tool, grasp the cartridge stem and pull it straight
out of the valve. |
 |
| 3e. |
Cartridge Reassembly
You can now install your new cartridge. Push the cartridge
straight into the valve, making sure that the ears of the cartridge
are lined up precisely with the retaining clip notch. |
 |
| 3f. |
To reinstall the cartridge
into your faucet assembly, reverse the steps that you followed to remove
the old cartridge. Replace the retaining clip and reinstall the washer
and the limit stop onto the top of the cartridge. Replace the two rings. |
 |
| 3g. |
Using a Philips head screwdriver
screw the handle adapter onto the cartridge stem. Push the handle down
onto the faucet housing, and resecure with the hex key. Go to step
8 if you want to reverse the Hot and Cold sides. |
 |
| 4a. |
Disassembly
To remove the cartridge from your faucet assembly, first use a hex wrench to
loosen and remove the screw from underneath the handle. Then, pull the handle
out away from the wall and unscrew the handle adapter and remove it. |
 |
| 4b. |
To get access to the cartridge,
unscrew and remove the faucet escutcheon. Remove the washer and the
limit stop from the cartridge and use pliers to remove the retaining
clip. |
 |
| 4c. |
Cartridge Removal
You are now ready to remove the old cartridge. Insert the white plastic tool,
which is included in your kit, onto the cartridge stem so that it straddles
the ears. Use pliers on the white plastic tool and loosen the cartridge by
twisting back and forth. After removing the white plastic tool, grasp the cartridge
stem and pull it straight out of the valve. |
 |
| 4d. |
Cartridge Reassembly
You can now install your new cartridge. Push the cartridge
straight into the valve, making sure that the ears of the cartridge
are lined up precisely with the retaining clip notch. |
 |
| 4e. |
To reinstall the cartridge
into your faucet assembly, reverse the steps that you followed to remove
the old cartridge. Reinstall the retaining clip, the limit stop and
the washer onto the cartridge. Fasten the escutcheon to the wall. |
 |
| 4f. |
Replace the handle adapter,
and finally secure the handle using the hex key. Go to step 8 if you
want to reverse the Hot and Cold sides. |
 |
| 5a. |
Disassembly
To remove the cartridge from your kitchen faucet assembly, first use a flat-headed
screwdriver to carefully pry the cover from the top of the handle. Using a
Philips screwdriver, unscrew the handle screw and pull the handle up off the
faucet assembly. Unscrew the collar by hand and lift off. Next,
lift off the pivot retainer (black in color). |
 |
| 5b. |
Using a crescent wrench, twist
off the retainer nut. Pull off the washer from the cartridge and use
pliers to remove the retaining clip. |
 |
| 5c. |
Cartridge Removal
You are now ready to remove the old cartridge. Insert the white plastic tool,
which is included in your kit, onto the cartridge stem so that it straddles
the ears. Use pliers on the white plastic tool and loosen the cartridge by
twisting back and forth. After removing the white plastic tool, grasp the cartridge
stem and pull it straight out of the valve. |
 |
| 5d. |
Cartridge Reassembly
You can now install your new cartridge. Push the cartridge
straight into the valve, making sure that the ears of the cartridge
are lined up precisely with the retaining clip notch. |
 |
| 5e. |
To reinstall the cartridge into your faucet
assembly, reverse the steps that you followed to remove the old cartridge.
Reinstall the washer onto the cartridge stem and reattach the retainer
nut. |
 |
| 5f. |
Tighten the collar on to the faucet
assembly. Lastly, reattach the handle and click the handle
cover into place. Go to step 8 if you want to reverse the
Hot and Cold sides. |
 |
| 6a. |
Disassembly
To remove the cartridge from your faucet assembly, first use
a hex wrench to loosen and remove the screw from the base of the
handle. Then, pull the handle up off the faucet assembly. |
 |
| 6b. |
Unscrew the dome and remove it. Remove
the connector screw and lift off the adaptor and connector assembly.
Next, remove the white handle stop. |
 |
| 6c. |
Unscrew the retainer nut using a crescent
wrench. Pull off the washer from the cartridge and use
pliers to remove the retaining clip. |
 |
| 6d. |
Cartridge Removal
You are now ready to remove the old cartridge. Insert the
white plastic tool, which is included in your kit, onto the cartridge
stem so that it straddles the ears. Use pliers on the white plastic
tool and loosen the cartridge by twisting back and forth. After removing
the white plastic tool, grasp the cartridge stem and pull it straight
out of the valve. |
 |
| 6e. |
Cartridge Reassembly
You can now install your new cartridge. Push the cartridge
straight into the valve, making sure that the ears of the cartridge
are lined up precisely with the retaining clip notch. |
 |
| 6f. |
To reinstall the cartridge into your faucet
assembly, reverse the steps that you followed to remove the
old cartridge. Reattach the ring with adjustable pliers. Reinstall
the washer onto the cartridge stem and reattach the retainer
nut. |
 |
| 6g. |
Secure the handle adapter to the cartridge
stem and replace the cover. Lastly, reattach the handle. Go to step
8 if you want to reverse the Hot and Cold sides. |
 |
| 7a. |
Disassembly
To remove the cartridge from your faucet assembly, first use
a flat-headed screwdriver to carefully pry the cover from the handle.
Using a Philips screwdriver, unscrew the handle screw and pull the
handle up off from the faucet. |
 |
| 7b. |
Using pliers, loosen and remove the pivot
retainer nut as well. Remove the washer from the cartridge and use
pliers to remove the retaining clip. |
 |
| 7c. |
Cartridge Removal
You are now ready to remove the old cartridge. Insert the
white plastic tool, which is included in your kit, onto the cartridge
stem so that it straddles the ears. Use pliers on the white plastic
tool and loosen the cartridge by twisting back and forth. After removing
the white plastic tool, grasp the cartridge stem and pull it straight
out of the valve. |
 |
| 7d. |
Cartridge Reassembly
You can now install your new cartridge. Push the cartridge
straight into the valve, making sure that the ears of the cartridge
are lined up precisely with the retaining clip notch. |
 |
| 7e. |
To reinstall the cartridge into your faucet
assembly, reverse the steps that you followed to remove the old cartridge.
Replace the washer onto the cartridge stem. Using pliers, secure the
limit stop to the faucet assembly. |
 |
| 7f. |
Reattach the handle by flipping it down
over the cartridge from the back. Secure the handle with the screw
and clip the handle cover into place. Go to step 8 if you want to reverse
the Hot and Cold sides. |
 |
| 8. |
Reversing Hot & Cold
If you need to reverse the sides for Hot and Cold water first
remove the handle. Next, rotate stem exactly 180 degrees and replace
the handle. |
 |
| |
Watch
the Animation
|
|
Before
installing new faucet, always turn water supply OFF before removing
existing faucet. Turn faucet on to relieve water pressure and to
insure water is completely off. Faucet models have slightly different
instructions. Please review each step before installing.
